Milling edge-line rumble strips on the SR 74 and SR 42 approaches for J.A. Long.

At SR 74 and SR 42 in Monroe County, Georgia, two state routes meet at a skewed angle. The Georgia Department of Transportation’s solution was Georgia’s first dogbone roundabout. Our Moses Grass crew traveled from Uvalda to mill edge-line rumble strips into the new asphalt on the approaches for J.A. Long.
The shape makes sense from the air. Two round ends are joined by a narrower middle, giving GDOT room to work with the angle of the existing roads. The curves guide drivers into the roundabout at lower speeds. According to Monroe County, the design also reduced the need to move existing utilities and acquire additional right-of-way compared with the conventional circular layout that GDOT considered.
The safety concern was especially clear in the turning movements. In the crash history GDOT presented to Monroe County, nearly two-thirds of the reported crashes involved vehicles making a turn or waiting to turn. The new layout was designed to improve how traffic moves through that junction. Read Monroe County’s project announcement.
Our part of the job was on the stretches of fresh asphalt leading into the roundabout. The operator guided the milling machine along the outside edge of the travel lane, cutting the repeating series of grooves you can see in the video. The ground shots give you a close look at the cutter and the crew alongside it. The overhead shots show where that work sits in relation to the intersection.

When a tire rolls over the grooves, the driver can hear and feel it inside the vehicle. That quick warning gives someone drifting toward the shoulder a chance to correct course. The roundabout shape helps set the pace through the junction, and the rumble strips help drivers stay in their lane on the way in. Read more about rumble strips from the Federal Highway Administration.
Watch the operator make a pass from ground level, then see how SR 74 and SR 42 feed into the dogbone from above. Thanks to J.A. Long for bringing us onto the project and helping with traffic control while our crew worked.